-
A JYL-TECH recommends suitable RFID tags according to the working environment of pallets and totes.
1), Plastic housing RFID tags, by screw installation or insert into plastic container/turnover container barrel.
For example, compliant with the VDA standard KLT turnover box, the RFID tag is inserted into a slot and can be replaced after a cycle, or the code can be rewritten.
2), Screw installation, durable, anti-collision Laminated PVC tags, generally, the previously used tags to be replaced by using to insert card, and the tags are replaced every time when the turnover box is recycled.
-
A RFID substrate materials usually by PET and PI, paper and fabric. They are good for etching process with great chemical resistant performance and ideal hot-shrinkage rate. With E-printing circuit antenna, the substrate come to paper and some high-density fabric or textile which are easy to find.
* PET: Most popular substrate which is steady and cheap, limited shrinkage and deformation during thermosetting solid process in FLIP bonding.
* Paper: Both printing antenna and die-cutting Al antenna usually use paper substrate. It is eco-friendly and tamper proof. Disadvantage includes fragile and water absorption.
* PI: Suitable for both Al etching and Cu etching. It is with outstanding performance, steady, heat-resistant, and chemical-resistant. However, its price is high.
* Fabric: Mainly used for silver, graphene and other new e-materials printing antennas. Its disadvantage includes antenna is easily broken.
-
A * Flexible RFID Tag: Most cost-effective solution.
* RFID Hang Tag: Embedded RFID inlay into the hang tag, easy to use, and won’t affect the hang tag design.
* Fabric RFID Tag: 2-10 times washable. It solves the trouble that RFID tags or RFID hang tags are easily missing.
-
A Since container logistics tracking management involves complex, harsh working and metal environments, JYL-TECH recommends RFID tag type as follows:
1), RFID plastic housing tag and locker seal tag, which are durable, IP69 and with excellent electronic performance, are suitable for long-time working in harsh environment.
2), JYL-TECH RFID sucker tags can activate metal container as its antenna. This allows the tag to be read omnidirectional.
-
A General face-stock including paper, PP, PET, and fabric.
* Paper:
Thermal transfer printing is cheap, and good printing effect printed by common wax ribbon.
Direct thermal printing, no need TTR. Printing content can be survived for up to 2 years.
Digital printing, suitable for speed production for large quantity orders. Its price is higher than the other two.
* PP: Good texture, waterproof, price is a little higher than paper. It can be printed by high-class wax ribbon.
* PET: Good texture, waterproof and acid and alkali resistant. Its price is higher than paper and PP material.
* Fabric Materials:
Nylon: Cheap price, with good printing effect. Printable nylon material is more expensive. Available with perforate line.
Polyester: It is close to fabric, softer than nylon, and price is a little higher than nylon. Printing effect is based on the textile density. Printable material is more expensive, especially QR/barcode printable.
-
A * Customized RFID inlay with thinner substrate and use softer fabric.
* Printing graphene or silver antenna on the fabric directly.
-
A JYL-Tech recommends different RFID tags based on customer’s project.
1), The paper label is affixed to the outer box of the product, single-use, and low-cost. Personalized printing and coding are available on the surface of the label according to the specific product of the package.
2), For the tags attached to the box with metal or liquid products insides of the package, stacked to inventory, JYL-TECH can provide specific solutions for these projects, which need customers to provide specific application information.
-
A Paper and paperboard are widely used for hang tag.
Standard Gsm including: 300g, 350g, 400g, 600g and 700g
JYL-Tech adopts materials from UPM and Avery Dennison which guarantee quality, certifications, and the stability of adhesive performance.
-
A Cold cutting, also called flatbed die cutting, is suitable for nylon tape.
Polyester normally be cut by heat cutting or ultrasonic cutting. Heat cutting will cause uneven edges problems.
And the mainly cutting method is ultrasonic cutting and laser cutting.
-
A Automotive RFID tags must meet the requirements of traditional labeling rules of various automotive companies, as well as the performance requirements of RFID.
1), The RFID tags used in non-metal automotive parts are usually PET face stock and strong glue, It can be waterproof, dust-proof, and chemical resistant.
JYL-TECH can provide RFID labels variable data preprinted based on provided data.
2), For metal parts, we have flexible and printable anti-metal tags that can be suitable for tracking on metal and non-metal parts.
3), For special requirements, JYL-TECH can provide full independent development RFID tags. Such as the bolt tag on the engine with application in high temperature and several conditions. (Seal a RFID transponder on bolts, works like normal bolts).
4), For other items, such as sofas, labels on glass, special materials, our technicians can design a product that takes into account various interference and frequency differences and designs a product that achieves the maximum functional RFID tag under specific conditions.
